Sewer line are very long and endless but can eventually clog with grease, oil, mud, toilet paper, toys, grease, and sludge build-up.
Regular snake and unclogging tools don’t have the strength to remove thick and heavy obstructions for sewer backup. This is where hydro water jet cleaning service proves that it can be beaten. It is considered the safest and most efficient way to clean sewer and drain lines.
What is a Sewer Hydro Jetter?
Also known as ‘water jetters’, hydro jetters are powerful sewer cleaning machines that use high-pressure water jets to clear obstructions in commercial and residential sewer systems.
These truck-mounted machines can carry up to 1500 gallons of water per job.
How It Works
Before starting the process of jetting a line, the plumbing team conducts a video inspection by directing a small video camera into the sewer line to determine the clog’s location and what it contains.
The video inspection helps them ensure the pipeline’s configuration. Certain configurations can make sewage water back flush into the clean water supply.
Once they determine this won’t happen, plumbers use a jetter to dislodge clogs. The machine contains a water tank, nozzle, hose, and a device that pressurizes the water in the nozzle so it can shoot out with enough force to dislodge large and complex obstructions.
The nozzle size will differ depending on the size of the drain or clog type.
For example, the plumber may use a nozzle shaped like a chisel to cut through roots, hard build-up, and ice before water is jetted through.
To start, the plumber directs the nozzle into the pipe and then uses the jetter to blast pressurized water (up to 4,000 psi). This is usually sufficient to flush out debris and hardened obstructions.
Each nozzle is designed to direct the high-pressure stream back to the entry point so the nozzle can propel forward and pull the jetting hose through the pipe with it.
Professional plumbers will ensure they use the appropriate nozzle after evaluating the clog and factor pressure loss into their decision.
The water stream angle is varied for maximum efficiency. The plumber will direct it towards the pipe walls rather than directly at the clog to reduce the nozzle’s pulling power for the best cleaning job. While they can direct the stream at the center, doing so will not result in a thorough cleaning job.
Also Read: 5 Reasons You Need Plumbing & HVAC SEO
What Is Hydro Jetting Used For?
Hydro jetting is typically used to:
- Clear our sludge and debris
- Scour pipe walls
- Flushing out stagnant sewer systems
- Breaking tree roots growing in sewer lines
- Breaking up and removing calcified scale
- Washing out silt and sand
- Breaking up ice dams
Top Signs of a Blocked Sewer Line
If you searched for sewer cleaning near me and jetting sewer lines cost in Brooklyn, check for these signs that your sewer line is clogged:
- Strange gurgling noises in the toilet when flushed
- Overflowing toilet
- Water backs up in the sink drain or when the toilet is flushed
- The drains drain slowly or not at all
- A foul odor in the bathroom and shower stalls
- Multiple plumbing fixtures are blocked
How Often Should Sewers Be Hydro-Jetted?
Opt for regular sewer jetting or Maintenance to ensure the sewers under your property remain healthy. The process is safe, non-invasive, and eco-friendly and will save you time, stress, and money.
How often sewers should be hydro jetted depends on certain factors:
- How often the pipes and drains are used.
- The condition and age of the pipes and sewage system.
Typically, the sewer line of a standard home should be hydro jetted every 6 to 12 months. It would be best to get it done before you move into a new home or premises.
Get an inspection done beforehand.
Please keep in mind that older pipes may not be able to withstand the strong pressure from hydro jetting.
Clean out Your Sewer Lines to Prevent Blockages Down the Line.
Hydro jetting or jetting is a quick, efficient, and damage-free solution to clogged sewer lines. Please choose the best plumbers in Brooklyn with experience with this procedure, as it can do extensive damage in untrained hands.
High-pressure water has enough force to break pipes and cause serious injuries. Experienced plumbers will always inspect the sewer lines using a camera first to determine the type and location of obstructions before hydro jetting. They may also use a snaking machine to break up solid blockages so that the pressurized water can flush out soft grease and materials from the pipeline.